The incredible experience of driving with the installation of the best helper springs for Silverado 1500 remains a feeling no one can get over with.
But finding out which one will be the best is a matter of discussion which depends on various factor.
For anyone who is willing to enjoy the luxury of their vehicle and remain confident of its stability, alignment, wheel-balancing, and steering control, irrespective of the weight carried when towing other vehicles;
the Hellwig 987 Ez-990 helper spring remains the best option in a wide variety of spring choices.
- 1 A Comparison Table Of Top 07 Helper Springs For Chevy Silverado : 2022
- 2 What Are Helper Springs?
- 3 What Is The Purpose of Helper Springs?
- 4 Top 07 Best Helper Springs For Silverado 1500 – (Reviews : 2022)
- 4.1 01. Super Springs SSR-209-40/ Sumo Springs Rear (Best In Budget)
- 4.2 02. Hellwig 987 EZ-990 Helper Spring (Best For Your Vehicle)
- 4.3 03. Firestone W21-760-2430 Ride-Rite Air Spring System (Best For Towing)
- 4.4 04. Hellwig (61912) Helper Spring (Best For Increased Payload)
- 4.5 05. Dorman 929-128 Rear Leaf Spring (Best For Durability)
- 4.6 06. Tuff Country 81350 Leaf Spring Kit (Best For Outlook)
- 4.7 07. Super 11-1040 Leaf Helper Spring (Best For Old Suspension)
- 5 Basic Things To Consider When Buying A Helper Spring For Chevy Silverado
- 6 FAQ’s About Best Helper Springs for Silverado 1500
- 6.0.1 01. When Should I Make Helper Springs A Priority?
- 6.0.2 02. Why Does The Helper Springs Always Appear To Be Fully Compressed?
- 6.0.3 03. Can Vehicles Be Driven Without The Helper Springs?
- 6.0.4 04. Does Helper Springs Lift Vehicles?
- 6.0.5 05. How Does The Helper Spring React When Fastened To An Unloaded Vehicle?
- 6.0.6 06. Does Helper Springs Have The Same Function With Suspension Airbags, Or They Differ?
- 6.0.7 07. How Do I Check The Condition Of The Helper Spring?
- 6.0.8 08. Does Helper Springs Last?
- 6.0.9 09. How Exactly Does The Helper Spring Aid Towing?
- 6.0.10 10. Does Helper Spring Help In Exceeding Payload Capacity?
- 6.0.11 11. How Do You Install The Hellwig 987 EZ-990?
- 7 Conclusion
A Comparison Table Of Top 07 Helper Springs For Chevy Silverado : 2022
What Are Helper Springs?
Helper springs are spring enhancers fastened to the mainspring of a vehicle for high performance, both on and off the road.
It prevents the mainspring from dislodging itself from the spring seat, damaging the coil-over, threaded portions, and the spring seat.
What Is The Purpose of Helper Springs?
The helper springs do not allow the vehicle to sag or squat like other vehicles.
They assist the main springs to control balance and make effects of imbalance on a moving vehicle tender.
Helper springs allow a vehicle to have an increased journey and make the suspension droop to provide a significant boost in rebound and stroke to help in stabilizing the vehicle on imbalanced roads, especially when the wheel is off the ground.
Helper springs are often needed to sustain the vehicle and make the mainsprings more durable, as the factory springs might not be enough to carry heavy things for a long time.
They suspend the vehicle, act as shock absorbers, central the axel, allow better truck navigation, prevent trucks from swaying side by side, and carry weights placed on the truck.
Top 07 Best Helper Springs For Silverado 1500 – (Reviews : 2022)
Here is short but informative reviews which will help you to choose the suitable helper spring for your vehicle-
01. Super Springs SSR-209-40/ Sumo Springs Rear (Best In Budget)
- Free maintenance
- Stabilizes and decreases swaying
- Supports weight capability
- Pair items
The Sumo Spring rear is a maintenance-free sway stabilizer installed for smooth load carrying and a comfortable driving experience.
Sumo Spring products come in a wide range of lengths and textures. They do not leak air, nor need compressors.
They are neutral to UV rays, salts, oils and do not require any maintenance whatsoever.
They can compress to a maximum of 70% and extend to a tally of 30% of their initial height is unloaded.
- Easy Installation
- Reduces body rolls and sway
- Fair Price
- Perfect for towing
- Stiffer ride
- Adds extra life to old springs
- Super spring steel leaves
- Lifetime warranty
Hellwig is made up of components that are patented-plated and a heavy-duty powder kit.
Its incredible quality, zero maintenance, easy installation, and expected functionality of its design make it the best helper springs for Chevy 1500.
For any driver tired of experiencing truck squats on and off the road, and the duck perch trailers suddenly make when saddled with enormous weight;
this helper spring remains a highly recommended and reliable enhancer, as it is the exact tool that will enable them to have a top-notch user experience with their truck.
This load-enhancer keeps the steering soft and makes driving as easy as possible after being installed.
- Improves ride experience
- Enhances towing
- Corrects Truck-squatting
- Tough Installation
03. Firestone W21-760-2430 Ride-Rite Air Spring System (Best For Towing)
- Tightly-packed Air springs
- 4,800 lbs. weight capacity
Firestone 2430 is a heavy-duty air spring capable of enhancing weight capacities, ranging from 3,200 – 5,000 pounds.
It is an ISO validated helper spring that aids the weight capacity of vans, pick-ups, SUVs, and even commercial vehicles.
It reduces the rate at which the tires wear, aids vehicle handling, and corrects the truck’s headlight focus.
- Fantastic towing upgrade
- Truck leveling
- Lack of Clear Instructions
- Rough Riding
04. Hellwig (61912) Helper Spring (Best For Increased Payload)
- 2500 lbs. weight capacity
- No side effects on unloaded rides
- 2-in-1 load and sway control
This helper spring is best suited for silent rides, smoothness, weight carriage increment, and easy control.
It increases the vehicle weight carrying capacity to the maximum of the manufacturer’s vehicle weight rating while inhibiting truck sagging or squatting.
It consists of a bolt-on design, produced with an ASTM 5150 alloy spring heat-treated steel that improves stability and overall vehicle fitness.
- Easy installation
- Better towing control
- Increased payload
- Missing parts
- Damaged box
05. Dorman 929-128 Rear Leaf Spring (Best For Durability)
- Original functionality
- Corrosion-resistant steel leaf spring
Dorman is designed to bring back the performance of both the suspension and tension springs, especially when the leaf spring is already getting weakened or sagging.
This leaf spring can also be taken as a direct replacement item, which is easy to install, thus aiding a convenient and secured driving experience.
- High performance
- Easy fix
- Low buying rate
06. Tuff Country 81350 Leaf Spring Kit (Best For Outlook)
- Improved performance
- Extra weight capacity
Tuff country helper spring is designed to reinforce and improve the overall performance of the mainspring, allow a minimal increment in height, and aid the truck to gain an extra weight capacity.
This leaf spring is the most suitable helper spring that ensures a smooth riding experience with ground clearance is enjoyed.
- Better outlook
- Excellent product
- Easy to install
- Incomplete Kit
07. Super 11-1040 Leaf Helper Spring (Best For Old Suspension)
- Increases weight capacity
- Strengthens suspension
- Maintains Firmness
Super Leaf is a heavy-duty helper spring that increases weight capacity by correcting truck sagging, which is caused by a soft or slackened suspension.
It strengthens the suspension and aids the mainspring to maintain firmness.
Therefore, attempting to use them for mainsprings wider than 2.5 inches might yield a frustrating result.
- Super support for old suspensions
- Poor Shipping
- Non-detailed Instructions
- Poor Quality
Basic Things To Consider When Buying A Helper Spring For Chevy Silverado
Often when auto-mobile parts get faulty and need to be replaced, there are many varieties to pick from, which leaves especially first-time buyers confused.
As buyers, we often get lost between brand packaging and knowing exactly what to buy; that we end up paying for the wrong choices.
Therefore, to ascertain which helper spring is the best helper springs for Silverado 1500,
the following considerations shall be discussed to give better insight and guide towards making a solidified decision.
01. Business: As an individual or group, you are considering starting up a towing business, or you are already into logistics, one of the best ways to make your truck(s) keep wearing a smart look is to install the best helper for towing.
Hellwig 987 EZ-990 helper spring does not enhance towing alone but also aids vehicular activities and life span generally.
It makes sure logistics does not wear out the vehicle, or make it sag, regardless of the weight applied.
Its comfortable support over the years, and its credible reliability by more than 7million users, since its production has made this product reliable, and a safety precaution when it comes to considering it for business.
02. Unprecedented Situation: Even when an automobile is newly purchased, the chances that it might immediately develop a fault or have some parts wear out, despite being unused, are very high.
However, to proactively maintain a newly acquired truck and see to its easy navigation, there might be the need to fix enhancers for its smooth operation.
One of the ways through which you will be able to prepare your truck for unforeseen circumstances is to consider installing the best helper springs for Chevy Silverado.
This is because this vehicle’s model is sometimes tempting and might make you use it to move heavy things, even though you might not have bargained for such deeds at the point of acquiring your pick-up van.
03. Bad roads: Climatic conditionings, global warming, and flood is no doubt affecting almost everything around the world.
The effect of these has led to turf-cracking, muddy routes, imbalanced plains, and poor roads, which will always contribute to the damaging of vehicle springs, and make automobiles sway, lose grip, balance, and squat.
Yet, when the best helper springs for towing trucks are fastened to these vehicles,
they enhance the overall balancing of the vehicle and decrease the chances of accidents as drivers and towers go about their daily activities.
04. Economical: One of the best factors to consider when purchasing this specific hardware is its reliability and durability.
Amazon ranks it as the best helper springs for Chevy 1500, and it has maintained that spot for more than twenty decades, despite its very affordable cost.
05. Installation: Unlike many helper spring products, this product comes with an instruction manual that is exemplary and easy to follow.
With adjustable tensions, it is easier for every driver to adjust them to their desired positions.
However, despite the fact that the Hellwig 978 EZ-900 helper spring comes with an instruction manual, “a few numbers of people havefound it quite uneasy to install.”
Yet, for a lot of people not to find the installation quite difficult, several YouTube tutorials have been made to guide and simplify its installation process.
For the benefit of getting the installation details and understanding how to adjust the leaves,
any buyer who is willing to get themselves the best helper springs might need to watch this video-
FAQ’s About Best Helper Springs for Silverado 1500
01. When Should I Make Helper Springs A Priority?
For the sake of overall main spring maintenance, avoidance of accident through vehicle imbalance, swaying, and hopping at bump stops, the helper springs need to be fastened.
It helps the mainspring to remain properly seated against the lower spring seat or upper suspension so that weight can be balanced when loads are placed or removed from random angles in the vehicle, especially at the point of navigation through sharp corners and poor roads.
The helper springs make sure there are no slacks and make sure the mainsprings do not rattle.
It also helps the mainspring not to slam right back into the compartment as the suspension comes up while navigating an imbalanced or poorly maintained road.
02. Why Does The Helper Springs Always Appear To Be Fully Compressed?
Since the essence of the helper springs is to support and keep the mainspring where it belongs,
it is very common for the helper spring to be fully compressed.
The coils of the helper springs will touch each other due to the weight it carries.
Immediately the vehicle reaches an imbalanced spot;
the compressed helper spring expands to maintain an overall balance and contracts again when the ground is leveled.
03. Can Vehicles Be Driven Without The Helper Springs?
A lot of people believe that since “helper springs” simply “help” the main “springs”,
they are thus not necessary and can be removed or not even fixed at all if their truck is brand-new or if their mainspring is also newly replaced.
Some people remove their helper springs, hoping that doing so will make their vehicles drop a little bit lower.
Unfortunately, all these depictions and insinuations are ignorant plots to slam your vehicle, restrict the functionality of the coil-over, or perhaps damage both the coil-over and the vehicle.
Removing the helper spring is tantamount to removing the overall balance of a vehicle.
No one should think about or venture to remove a safety precaution, especially when their lives and the safety of others are somewhat dependent on it.
04. Does Helper Springs Lift Vehicles?
Helper springs are not made to be used as a way of lifting vehicles.
They are instead made to level the back of a truck.
However, since they are fully adjustable, they can be adjusted to raise the height of vehicles to experience more ground clearance.
Pick-up drivers sometimes use it to make their vehicles accommodate larger tires.
Furthermore, it is good to note that helper springs are not designed to be substituted for vehicle lifts.
They obviously cannot alter the height of an unloaded vehicle in any way.
05. How Does The Helper Spring React When Fastened To An Unloaded Vehicle?
Since most helper springs are patented for heavy-duty performance and allow trucks to lift weights better, the helper spring makes the vehicle stiff, giving the driver an unpleasant experience when the vehicle is unloaded.
The helper spring automatically stiffens often while on smooth surfaces to reduce boy roll and enhance better handling.
Therefore when the truck is unloaded, the helper spring compresses, stores energy then diverts the stored energy to the wheels, which in return affects the steering, thus giving the driver a feeling of stiffness and unpleasantness.
06. Does Helper Springs Have The Same Function With Suspension Airbags, Or They Differ?
The helper spring, and suspension airbag both function as enhancers, giving vehicles a smooth ride experience, aids trucks from sagging, saving automobiles from sagging, swaying, and are both forms of helper springs.
They both support and bolster the performance of the mainspring when it comes to smoother weight capacity.
The helper springs are easily adjustable by fastening or loosening the U-bolt to certain degrees while either decreasing or increasing air pressure till the driver is satisfied with the vehicle’s overall balance.
07. How Do I Check The Condition Of The Helper Spring?
To know if the helper springs are in the best condition, the leaves should be checked if one is flatter than the other.
The vehicle should also be inspected for overall balance or if its weight is tilting towards a single side.
The leaves must be examined in case of cracks and must be immediately replaced when found to be faulty.
The nuts holding the bracket to the U-bolt should be checked if it is loose or tight,
while the shackle pins must be properly checked in case there are bent pins that might need to be replaced.
Corrosion should be examined in case the clips holding on to the spring leaves remains intact.
Lastly, the spring leaf should be scrutinized if it is still tight or has loosened its firmness.
Should the helper spring appear rusty, considerations to replace it immediately should also be done as a precaution.
08. Does Helper Springs Last?
Although helper springs often last long, and some old trucks still stick with their aged helper string to date, yet there have been several occasions when they had to be changed.
Helper springs sometimes crack or break, causing rattling noises, while a wheel-alignment check can reveal if a helper spring is sagging.
09. How Exactly Does The Helper Spring Aid Towing?
Towing becomes easy with the aid of helper springs.
The best helper springs for towing fixes the issues of truck squats and make the vehicle balanced and firm.
It decreases the bouncing level of the truck, especially when it is driven over undulating pavements.
The helper springs also help stabilize the sway bars, enhance rebound control and make driving less stressful.
The hardware helps in decreasing a lot of body roll, also aids the truck’s body balancing.
It makes sure the headlights are pointing right at the turf and that overall driving is stabilized.
10. Does Helper Spring Help In Exceeding Payload Capacity?
Helper springs are not designed to increase the vehicle’s official weight carrying capacity.
They only supplement or assist the factory rear suspension.
As a professional driver, it is not advisable to put tons of weight that exceeds the maximum figure set by the truck manufacturer, with the excuse of the helper springs installation.
Another way the payload capacity of a truck can be exceeded if unavoidable is to reduce the vehicle’s weight by making use of lighter wheels that meets the gross axle weight rating requirements, by removing the bumper, or removing the bumper or removing the rear seat.
Helper springs are mainly designed for improved control and ride comforts while achieving the maximum payload of the vehicle, as stated by the manufacturer of the vehicle.
11. How Do You Install The Hellwig 987 EZ-990?
Immediately the product is unwrapped, it will be noticed that the package contains four leaves,
as the product comprises two additional leaves, meant to be fastened at both sides of the vehicle.
These leaves possess built-in hunches, which warrants that a longer leaf should be placed on the lower leaf as a pair.
Since there are two pairs of longer leaves and shorter leaves, a measurement tape can be used to ascertain their lengths for precise arrangement.
When each pair has been selected in longer and shorter lengths, the pair is placed on the top of the factory leaf-pack, with the hump over the factory U-bolt.
A long straight leg-U-bolt is placed on the cups on both ends of the leaf spring. One at the rear and the other at the front.
The bracket will be placed at the bottom of the leg-U-bolt while a bolt and washer are fastened uptight on both legs.
However, should the above description seem to be a little tedious to follow. Then you can watch this video-
The Hellwig 987 EZ-990 helper springs remain the best helper springs for Silverado 1500, as its durability is second to none, while its cost remains relatively affordable.
It is a helper spring that has been tested over decades with inspiring and consistent results,
while it could also be gotten at every store both online and locally around the world.