The ball joints are an important part of the Vehicle that needs immediate attention when it gets damaged.
But getting the best ball joints for Silverado is not easy, especially with the numerous brands available for sale.
It is easy to buy the wrong ball joints for the Silverado if you do not have the right knowledge.
We have taken it upon ourselves to show the best ball joints for Silverado trucks and factors to consider when replacing a Silverado’s ball joint.
- 1 A List of Top 05 Best Ball Joints for Silverado 1500/2500/3500
- 2 What is the Best Ball Joints for Chevy Silverado 1500?
- 3 What is the Best Ball Joints for Chevy Silverado 2500/3500?
- 4 Why Detroit Axle is the Best Brand for Silverado 1500/2500/3500?
- 5 A Detailed Review of Top 05 Best Ball Joints for Silverado 1500/2500/3500
- 6 Buying Guide for the Best Ball Joints for Silverado 1500/2500/3500
- 7 FAQs About the Best Ball Joints for Silverado 1500/2500/3500
- 7.0.1 01. What are the best ball joints for Chevy Silverado 1500 4×4?
- 7.0.2 02. What is the best ball joint for lifted Silverado?
- 7.0.3 03. Which are the best aftermarket ball joints for Silverado?
- 7.0.4 04. Which ball joints Chevy Silverado 1500 will fit perfectly in my vehicle?
- 7.0.5 05. How much does it cost to replace ball joints Silverado?
- 7.0.6 06. What is the best ball joints for Silverado 2500hd?
- 7.0.7 07. Who makes the best ball joints?
- 7.0.8 08. Which is the best ball joints for 07-13 Silverado?
- 7.0.9 09. Who makes the best replacement ball joints for a 2006 Silverado 2500hd?
- 7.0.10 10. How Do I Know When My Ball Joints Are Bad?
- 7.0.11 11. Do you need an alignment after replacing ball joints?
- 7.0.12 12. Should you replace upper and lower ball joints together?
- 8 Conclusion
A List of Top 05 Best Ball Joints for Silverado 1500/2500/3500
What is the Best Ball Joints for Chevy Silverado 1500?
Most people think MOOG is the best ball joint. But it’s a very common misconception.
MOOG ball joints won’t fit in the Silverado perfectly. So, there will be compatibility issues.
The Detroit Axle, on the other hand, will fit perfectly in your Chevy Silverado, and there won’t be any compatibility issues.
The Detriot Axle ball joint is made with some of the finest materials, giving it an edge over many other ball joint brands.
It is very durable due to special materials that make it anti-corrosive and keeps foreign substances out.
The ball joints are made especially for GMC and Silverado trucks when it comes to the Detroit Axle.
Their ball joints are made as a problem solver. It gives the vehicle a smooth and better ride.
It also enhances the Silverado’s handling.
Compared to other ball joints in the market, the Detroit Axle ball joint has a better customer satisfaction review.
The best part of this ball joint is that it is very affordable and is quite easy to install.
So, if you will be looking to install your ball joint yourself, you should try the Detroit Axle ball joint.
It comes with 4 joint ball parts in a park meant for all the suspension parts.
That is, for the upper and lower suspension area.
What is the Best Ball Joints for Chevy Silverado 2500/3500?
If you are looking for the best ball Joint for the Chevy Silverado 2500/3500, consider getting the Detroit Axle.
It fits easily on the Chevy Silverado 2500 and 3500.
The best fit of the Detroit Axle, among other things, is what makes this ball joint stand out.
Many ball joints may require the re-shape or readjusting of the boot before it can fit.
It is one of the major complaints of the MOOG ball joint.
Readjusting the ball joint is not an easy process, and if not done properly, it may damage the ball joint.
Many readjusted ball joints may not be as durable as those that have not been adjusted.
We advise getting a ball joint that perfectly fits your Silverado truck.
Why Detroit Axle is the Best Brand for Silverado 1500/2500/3500?
The Detriot Axle ball joint is considered the best brand for the Silverado trucks because it has the best fit.
The fitting of the ball joint is an important factor that should be considered before getting a ball joint.
Getting a ball joint that fits the truck perfectly will save a lot of stress, time, and money.
Another reason why the Detroit Axle is the best for the Silverado 1500, 2500, and 3500 is because of its durability feature.
The Detroit Axle ball joint is built to withstand high impact and can be used in harsh environmental conditions.
It also has anti-rust components, making it highly resistant to rust or corrosion.
The ball joint gives the Silverado truck an enhanced driving experience, free of noise and instability.
It promotes better handling of the vehicle.
If the Silverado is a heavy-duty truck, you do not need to worry, and the ball joint is also suitable for it.
A Detailed Review of Top 05 Best Ball Joints for Silverado 1500/2500/3500
01. Detroit Axle 4S1900478-DA
- 4 ball joints in a box
- Anti-corrosion coating
- Direct-Fit design
- Heavy-duty ball joints
- Build With Strict Quality Control Standards
If you are looking for the best ball joints in the market today, then the Detroit Axle stands out among the numerous products available in the market.
These ball joints are built to withstand wear and tear even when used under extreme conditions.
It is made with special materials that make it very durable.
The ball joint can withstand extreme impacts and provides a smooth driving experience.
The popular Detroit Axle made this ball suspension joint known for its unique and durable aftermarket auto parts.
They are trusted to deliver premium aftermarket products.
They have over 30 years of experience in making these products, and with this experience, they have been able to create the best ball joints for Silverado trucks and many other truck brands.
Also, you should know that Detroit is made to surpass the origin ball joints of the Silverado Truck.
So you should expect a better driving experience, handling, and durability.
The best part of getting this ball joint is that it is quite affordable and with a great warranty offer.
The ball joint has grease fittings, which means that you can grease the parts yourself.
This axle joint is great for most Silverado trucks and does not have any major downside.
You can buy a full set of front upper and lower ball joints or only lower ball joints for Silverado 1500/2500/3500.
Click here to check the price.
|Upper & Lower Ball Joint||Detroit Axle|
|Lower Ball Joint||Detroit Axle|
- Premium driving quality and handling
- It comes with ball joints for all the wheels
- Great warranty offer
- No pre-grease feature
02. MOOG K6539 Ball Joint
- Belleville Washer Pre-load
- Hardened Stud
- Polychloroprene Sealed Boot
- Metal Gusher Bearing
The MOOG K6539 ball joint is another great ball joint you can use for your Silverado truck.
It comes with many unique features that make your truck stand out.
One of the unique components of this ball joint is that it has an advanced Polychloroprene seal boot.
It allows the ball joint to withstand any form of the condition it is used in.
The ball joint has a metal gusher bearing that promotes stability and better handling when driving, greatly improving your truck’s driving experience.
It is also made of special hardened materials that make the ball joint durable.
MOOG K6539 is made by MOOG, a well-known company that deals with making aftermarket auto parts that solve problems in vehicles.
Their reputation precedes them as they have created a ball joint known to solve vehicles’ suspension problems.
The ball also comes with tight tolerance, provided by the Belleville washer pre-load feature.
It is designed to allow easy lubrication, which adds to its durability.
Its design also allows for easy installation, which means if you are installing it yourself, it will be easier for you.
“The problem people face with this ball joint is that it does not come in pairs, just singles, and it may not be the best fit. The ball joints may be too small for your vehicle.”
Check the price from here
|Silverado 2500/3500||Moog : K6693|
|Silverado 1500||Moog : K6539|
|Silverado 1500||Moog : K500245|
- It is Affordable
- Easy to install
- Greasable design
- Durable built material
- Small ball joints
03. TRQ PSA63179 Ball Joint
- Perfect fit
- It comes with 4 ball joints in a box
The TRQ ball joint is made to give your vehicle the experience that it had when you first bought it.
The ball joint is made from state-of-the-art material that guarantees durability and stability after being installed.
TRQ Auto Parts is a reputable company known for creating some of the best auto parts available today.
The products are known to be perfect fits, which should be expected in their ball joint products.
They have considered many problems faced by trucks when designing these ball joints.
These problems, such as difficulty in handling, noise from the ball joint, and durability, are all considered.
This ball joint is designed specifically to withstand harsh environmental conditions.
They are made to be resistant to corrosion.
It comes with a pre-grease feature and does not need grease fittings.
This special feature helps you save money and time to grease the ball joint.
If you are looking to install the ball joint yourself, then this ball joint could be the best for you.
It is easy to install and does not require professional knowledge or assistance.
“The only complaint by buyers is that it does not have greasing fittings, which is because it comes with a pre-grease feature sealed with the ball joint.”
- It is easy to install
- Anti-corrosive features
- It is pre-greases
- It does not have grease fittings features.
04. ACDelco Advantage 46D0103A
- Anti-corrosion coating
- Strengthened body frame
- Designed and manufactured in a 9001-certified facility
- It comes with 1 ball joint in a box
ACDelco is an automotive manufacturer known for creating durable and high-performance auto parts.
This high performance and durability can also be seen in this ball joint.
The manufacturer has made sure to use premium materials to create their products.
The best part of using this ball joint is that General Motors approve it.
After installing this ball joint, you can expect your truck to have an improved driving experience.
You can expect better handling and less noise from your wheels when driving.
They also have been able to coat this ball joint with anti-corrosive material to allow it to become resistant to wear and tear.
The ball joint is also very affordable compared to other available ball joints.
The shell of the ball joint is made to strengthen the ball joint and allow it to withstand harsh conditions.
“A major problem that this ball joint has is that its boot does not fit, and any modification made to it may damage it.”
You also can order the upper or lower ball joint of Silverado from here.
|Upper Ball Joint||AC Delco : 46D0103A|
|Lower Ball Joint||AC Delco : 46D2271A|
- It is affordable
- It is easy to install
- It is built to last long and give high performance
- It can be used for both GM and Non-GM trucks
- Easily rust
- It has a big boot fit.
05. Scitoo K6540/K6541 Ball Joint
- Anti-corrosion coating
- 4 ball joints in the box
The Scitoo K6540/K6541 is another great ball joint that you can try for the Silverado truck.
This ball joint provides a great driving experience to users after being installed.
It serves as a solution to many factors that may be bothering your suspension.
Some of these problems may include noise from the suspension area, bad handling, and many more.
“The problem that this brand of ball joint faces is that it may not be a perfect fit for all Silverado cars.”
- Easy installation
- It is cheap
- It has noise cancellation
- It does not have a perfect fit.
Buying Guide for the Best Ball Joints for Silverado 1500/2500/3500
Below are features that you should look out for when buying ball joints.
The features include:
01. Pre-grease or Self-greasing
You must understand that the ball joint comes in two forms when it comes to greasing or lubrication.
There is the self pre-greased and self-greased.
The pre-grease are ball joints that the manufacturer has already greased.
The manufacturer greases or lubricates this ball joint and then seals it.
This type of ball joint does not need greasing during installation.
However, the self-grease ball joint is the exact opposite of the pre-greased.
The self-greased requires that you grease the ball joint before installing them.
People prefer the pre-greased because it saves time and money when installing the ball joint.
When buying a ball joint, you should consider this essential factor if you do not want to waste money.
Not all ball joints are the same and can fit into your vehicle, and this is why you should know the type that does fit.
You can do this by checking for the type of ball joint that fits the model of your vehicle.
You can use your vehicle’s manual or check out the official website of your vehicle’s manufacturer.
It will help you get accurate information about your vehicle’s ball joints.
Also, you could check if your vehicle needs either a lower or upper ball joint change or even both.
Although we advise that when changing your ball joint, consider changing the four parts.
If you want to replace the ball joint of your vehicle then this video will help you.
Like we have said earlier, not all ball joints are the same; they come in different types.
There majorly two types of ball joints.
These are the load-carrying ball joints and the non-load carrying ball joints.
The name says it all when it comes to the load-carrying ball joints.
This ball joint type is meant to carry the vehicle’s weight easily.
You can see this type of joint ball in the lower suspension area.
On the other hand, the non-load carrying ball joints are not meant to carry the vehicle’s weight.
The non-load carrying ball joint can be seen in the upper suspension area.
04. Number of Ball Joint Parts
Different aftermarket auto parts dealers sell varied numbers of ball joints in a park.
Some sell 4 ball joint parts in a park, while others may sell just one ball joint part.
You should understand that an average vehicle makes use of 4 ball joints.
It is more economical to buy the ones that come with all 4 ball joints, especially when changing your vehicle’s ball joints.
Also, some brands of ball joints offer a more advanced product by selling a complete front suspension kit, which includes the ball joints, rods, arms, and other parts.
These types may be more expensive than the regular ones.
The ball joints you buy solely depend on your vehicle’s needs.
05. Features of the Ball Joints
Some ball joints come with unique features that may be useful for your truck.
The special feature of ball joints depends solely on the brand of ball joint you will be buying.
The best way to find out about this special feature that these ball joints may come with is to read the review section before buying, that is if you are buying online.
The review section does not just give special features of the brand of joint ball that you will be getting.
This section also gives the downsides of the brand.
People who have used the product come to this section to express their satisfaction and rate it.
The coating is also an essential aspect to consider because it has to do will the rust of the ball joint.
The type of coating will determine how fast or slow the part with rust or respond to wear and tear.
You must consider buying a ball joint with a highly resistant coating for your vehicle.
We advise that you get a ball joint that has a polyurethane coating.
This coating is highly resistant to rust or corrosion.
It also promotes the durability of the ball joint.
A good coating will prevent any form of foreign material from affecting the performance of the ball joint.
FAQs About the Best Ball Joints for Silverado 1500/2500/3500
01. What are the best ball joints for Chevy Silverado 1500 4×4?
There are so many ball joint products available in the market, and so many people consider some of these products the best for the Silverado 1500 4×4.
Among these products, the Detroit Axle stands out.
The ball joint is perfect for the Silverado truck because of its unique features.
The entire body of the ball joint is made from high-quality material that guarantees the high performance of the part.
This material also helps drastically slow down corrosion and rust in the parts, therefore promoting durability.
Also, the Detriot Axle ball joint is a perfect fit for the truck.
Once installed, you can rest assured that your Silverado driving experience and handling will improve.
02. What is the best ball joint for lifted Silverado?
If you have a lifted Silverado truck, any type of best fit ball joint will be perfect for the truck.
You should consider using the Detriot Axle ball joint for lifted Silverado trucks.
The ball joint is specifically made to fit Chevy Silverado and GMC trucks.
It is what makes this type of ball joint special.
If you are looking for another option, you can opt for the MOOG ball joints.
They are also great for Silverado trucks but might not fit into all Silverados.
The Detroit Axle is also perfect for heavy-duty Silverado trucks.
03. Which are the best aftermarket ball joints for Silverado?
People often argue that MOOG ball joints are the best aftermarket ball joint parts today, but we like to believe otherwise.
Although the MOOG aftermarket joint plug like the MOOG K80026 offers amazing features, we consider the Detriot Axle better.
The Detriot Axle has a better fit for all Silverado trucks and does not require adjustment to fit.
Many MOOG balls joint have the disadvantage of having small ball joints, which may not fit many Silverado trucks.
This problem is not so with the Detroit Axle, and they are made to fit most Silverado trucks perfectly.
The Detriot Axle is known to give Silverado trucks a smooth, enhanced drive and also enhances its off-road capacity.
04. Which ball joints Chevy Silverado 1500 will fit perfectly in my vehicle?
The Detroit Axle 4S19000478-DA is a perfect fit for the Chevy Silverado 1500.
The ball joint does not need readjustment when you are installing.
It is also a perfect fit for many other Silverado trucks.
Some of the trucks it fits include Chevrolet Silverado 2500, 3500, Chevy Avalanche 2500, and many other truck brands including the GMC Sierra 2500, 2500(4WD), Sierra 3500, and many more.
The ACDelco ball joint is another perfect fit ball joint for the Chevy Silverado 1500.
The ball joint also does not need to be readjusted before installing into the Silverado 1500.
It is also cheap and easy to install, like the Detroit Axle ball joint.
05. How much does it cost to replace ball joints Silverado?
The cost of replacing your Silvardo’s ball joint may vary depending on several factors.
Some of the factors include the brand of the ball joint you will be getting if you will be installing it yourself or getting professional help if you will be changing the full front suspension or just the ball joints, and how many ball joints you be changing.
You are expected to spend between $20 to $100 on each ball joint.
If you are getting professional help, it could cost you another $100 labor.
You should note that the ball joint may cost more depending on the model of your Silverado truck.
06. What is the best ball joints for Silverado 2500hd?
You can also opt for the Detriot Axle ball joint for your heavy-duty Silverado 2500.
This is because the ball joint is built to work under any circumstance it is put under, including with heavy-duty trucks.
The ball joint is also built to carry a lot of weight with ease.
It can withstand any form of impact while driving the truck.
The Detroit Axle is considered one of the strongest and most reliable ball joints that you can get for any Silverado truck.
It is not just strong but also durable.
It is because of the materials and special coating used in manufacturing these ball joints.
07. Who makes the best ball joints?
You will find on the internet that MOOG makes the best ball joints. But most MOOG wouldn’t fit in perfectly in Silverado.
There is a compatibility issue.
If you own a Silverado, then go for Detroit Axle because it will fit perfectly in Silverado.
Detriot Axle is an aftermarket auto part manufacturing company that deals with solving problems that your vehicle may encounter with its parts.
They have been able to put into consideration many problems vehicles face.
Their team of experienced experts has used these problems to create the perfect solution for your vehicle.
They also have great customer satisfaction and reviews.
So, there is nothing to worry about with the Detroit Axle ball joint.
08. Which is the best ball joints for 07-13 Silverado?
A wide variety of ball joint brands will work perfectly with 2007 to 2013, or as they call it, the second generation Silverado trucks.
One of the best ball joint brands for these models of Silverado is the Detroit Axle.
It is an amazing ball joint that enhances your Silverado truck’s handling after installation.
Another great brand is the MOOG which is considered one of the best ball joint brands that can be used for the second-generation Silverado.
It is durable and can withstand great impact because of its special steel body and coating.
The only problem that this ball joint may face is that it may not be a perfect fitting.
It is what makes the Detriot Axle superior.
09. Who makes the best replacement ball joints for a 2006 Silverado 2500hd?
When it comes to a heavy-duty 2006 Silverado truck, you should consider the Kryptonite ball joint.
This ball joint type is specifically for heavy-duty trucks like the 2006 Silverado 2500hd.
The ball joint comprises a long-lasting black oxide body that makes it highly resistant to rust and repels foreign materials from affecting the ball joint.
The Detriot Axle is another ball joint that would be perfect for a 2006 Silverado 2500hd.
It is also made of specially hardened material, perfect for the 2006 Silverado 2500hd.
It is highly resistant to corrosion and a perfect fit for the truck.
You should also note that it is easy to install.
10. How Do I Know When My Ball Joints Are Bad?
It is easy to know when the ball joints are bad and are due for replacement.
All you have to do is pay attention to the vehicle when driving.
When driving a vehicle with a bad ball joint, you will hear a clunky or squeaky noise coming from the wheels.
This is the first sign that shows that something is wrong.
In addition, you will begin to realize that your tire wear is looking uneven.
At this point, it is getting a bit dangerous to continue using the vehicle.
You need to change the ball joint quickly once you start having bad car handling and shaky steering.
11. Do you need an alignment after replacing ball joints?
Having an alignment done on the vehicle after replacing its joint is unnecessary.
Replacement of a ball joint will not affect the alignment of the vehicle.
The only way the vehicle’s alignment can be affected is if the installation is not done properly.
If this happens, reinstall the ball joints properly.
If the vehicle previously had alignment issues before installing the ball joints, the problems are still there after the installation.
At that point, you will have to have an alignment done on the vehicle.
If you do not have proper knowledge about suspension and ball joints, you can take your vehicle to a professional for proper care.
12. Should you replace upper and lower ball joints together?
We advise that when replacing the ball joints, you should replace all the ball joints together.
It includes the upper and lower ball joints.
This should be done because if one ball joint gets damaged, there is a high possibility that all the other ball joints are damaged too.
There is a wide variety of ball joint brands in the market, and it can be a bit tricky to choose the best ball joints for Silverado.
You need to be equipped with the right knowledge not to get the wrong ball joint for the Silverado.
This is why we recommend the Detroit Axle ball joint.
We consider the Detroit Axle ball joint as the best ball joint for Silverado trucks.
The ball joint is durable and made to give the truck a smooth and comfortable ride.
Let us not forget that this ball joint is reliable and easy to install.
It means that you can easily install the ball joint yourself, saving money that would be used to hire a professional.
It will cost $100 to hire a professional to install the ball joint.